Abstract—Reconfigurable hardware module for Automatic digital Modulation Identification (AMI) scheme has been developed and presented in this paper. The proposed module has been developed using Matlab / Simulink and implemented on Xilinx Virtex v3200efg1156 FPGA device. The synthesis and test results show that the power required to implement the module is 466 mW and the propagation delay is found to be 70.396 ns. It is also estimated that the utilization of the chip area is 32.11%. The validation results show that the module can beused for identification of modulation schemes used in SD Rreceivers.
Index Terms—Software Defined Radio, Modulation identification, FPGA, Matlab.
P. Prakasam is a Research Scholar and he is with Department of Electronics and Communication Engineering, Maha Barathi Engineering College, Chinnasalem - 606 201, India. (e-mail: prakasamp@gmail.com).
M. Madheswaran with Centre for Advanced Research, Department of Electronics and Communication Engineering, Muthayammal Engineering College, Rasipuram - 637 408, India. (Corresponding Author - Phone: +91-4287-226737, fax: +91-4287-226537; e-mail: madheswaran.dr@gmail.com)
Cite: P. Prakasam, MIEEE, SMIACSIT and M. Madheswaran, MIEEE, SMIACSIT, "Reconfigurable Automatic Modulation Identification Hardware Module for Software Defined Radio Receivers," International Journal of Computer Theory and Engineering vol. 1, no. 5, pp. 562-570, 2009.
Copyright © 2008-2024. International Association of Computer Science and Information Technology. All rights reserved.
