doi: 10.7763/IJCTE.2012.V4.578
Design, Simulation and Construction a Low Pass Microwave Filters on the Micro Strip Transmission Line
Omid Borazjani
,
Arman Rezaee
- Department of Communication Engineering, Islamic Azad University, Dashtestan Branch, Iran.
Abstract
In this paper a low pass microwave filter has been designed. The filter has designed by step impedance method in which the alternative part characteristic linear impedance is too high or too low design. In this filter with changing every high or low impedance characteristics such as length or width desired characteristics can be rich and it has stimulated by using of HFSS software, and relying on full-wave analytical methods in three dimensional work page. Design with making by the micro strip technology, it becomes practical. This Filter has less complexity rather than other filters. Results of practical measure and simulation have been a fairly good agreement together.
Keywords
- Step impedance
- microwave filter
- micro strip
How to Cite
Omid Borazjani and Arman Rezaee, "Design, Simulation and Construction a Low Pass Microwave Filters on the Micro Strip Transmission Line," International Journal of Computer Theory and Engineering, vol. 4, no. 5, pp. 784-787, 2012. https://doi.org/10.7763/IJCTE.2012.V4.578
Copyright & License
Copyright © 2012 by the authors. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).